MH900 Men's Waterproof Mountain Hiking Rain Jacket - Black

8382335

QUECHUA

Write the first review
Made for mountain hikers who need to be protected from the wind, rain and snow and to keep dry during exercise
Multi-option hiking jacket to stay dry and warm! This jacket is waterproof, breathable, ventilated, lightweight and very versatile because of its variable volume hood and padding.
Sizes guide

Beli
     Di Toko

Lihat semua toko

Advantages
Waterproof3-layer fabric (15,000 mm). W/P seams & zips. Tested under 450L/hr/M² for 4hrs
BreathabilityHydrophilic membrane (RET=6): limits condensation inside the garment.
Ventilation45cm underarm ventilation zips that help to eliminate perspiration (Size: L)
Freedom of movementStretch fabric and ergonomic cut for freedom of movement.
LightweightWeight: 565 g in size L. The best ratio weight / protection / resistance.
Compact designLightweight, compressible fabric for minimal weight and pack space.
Abrasion resistanceDurable reinforcements on the shoulders, cuffs and hips.
Pockets2 hand pockets and 2 chest pockets with waterproof zips. 1 inner chest pocket.
Warranty2 Years
Technical Information

1
Sizing and fit information
Tailored cut.The inner volume of this jacket allows you to wear another light and thin layer of clothing, like a down or padded jacket. Construction and component allow for enhanced ease of movement at the shoulders and arms.
2
Plus product
A single setting, a single gesture to adjust the hood.
3
Hood
Deep cut that covers you completely.3-point adjustment system (height, depth and volume) with 1 single elastic cord + toggle. Visor for maximum face protection.
4
Pockets
Outer: 4 large hand pockets with taped zip closure. 2 chest pockets and 2 hand pockets. Inside: 1 waterproof pockets with zip + 2 quick access pockets with netting.
5
Jacket hem drawcord
Elastic draw-cords and toggles.
6
Adjustment of cuffs
Velcro tab fasteners.
7
Additional recommended products
Waterproof overtrousers to protect also the lower body and thus to enjoy a complete and effective protection against rain during your excursions in the mountains. Care products: waterproofing spray or liquid in the machine To renew the fabric's water repellent properties and optimise performance throughout the lifespan of your garment.
8
Main component
3-layer coated fabric.
9
Waterproofing of the garment
We test a fabric's resistance to water pressure by measuring the height of a column of water supported by the fabric in mm (test based on the ISO 811 standard). The better the fabric resists pressure, the more waterproof it is. Components with a 2000 mm rating can withstand the pressure of a 2000 mm column of water (which is equivalent to a rain shower lasting two hour).
10
Component waterproofing
This garment has been shower-tested using 450 litres of water/sqm/hour for 4 hours. This test reproduces the conditions of a tropical storm. Garment's waterproof properties linked to fabric used, watertight seams and assembly process .
11
Component breathability
To find out whether a fabric is breathable, we measure its evaporative resistance or RET (based on the ISO 11092 standard). The lower the fabric's resistance, the more water vapour generated by physical activity is evaporated, and the higher the fabric's breathability. For example: RET < 9 = extremely breathable fabric / 9 < RET < 12 = very breathable fabric / 12 < RET < 20 = breathable fabric / RET > 20 = fabric is not breathable or has low breathability.
12
Component with coating or a membrane
The coating is like a layer of "paint" applied on the underside of the fabric to make it waterproof while remaining breathable. It is often less costly than a membrane, and requires a lining for protection. The membrane is like a very fine plastic film (polyurethane) making the component waterproof while remaining breathable. It has the advantage of being more supple, lightweight, durable and often more breathable than the coating.
13
Component 3 layers, 2 layers or 2.5 layers
3 layers: the membrane is bonded to an inner and outer layer of the component. This construction helps the membrane last longer and boosts the component's performance. 2 layers: the membrane is only bonded to the outer fabric, the inner protective lining is free. This construction costs less but is generally more cumbersome. 2.5 layers: the membrane has inner protection with a kind of varnish coating rather than an actual layer to make it as lightweight as possible.
14
Breathability of the garment
In addition to breathability of the fabrics used, Quechua develops technical solutions (zips, ventilation, mesh, etc.) to improve the overall ventilation of its trekking jackets and overtrousers designed for great hiking use (Forclaz, Bionnassay and Helium lines). These ventilation systems allow you to regulate the temperature inside the garment and also to facilitate the transfer of perspiration generated by the body during physical effort.
15
Water-repellent component
A fabric is water repellent when it allows water to slide over its surface without seeping in. This prevents the fabric from soaking up water and keeps it lightweight and breathable. A fabric becomes water repellent by applying a treatment to its outer surface. This treatment must be renewed throughout the garment's lifetime (recommended after every three washes). All Quechua waterproof jackets have received a water repellent treatment.
16
Comparative note on the environmental impact of products
The environmental impact of each product is calculated for the product's entire life cycle, using different indicators. A general ABCDE rating is attributed to help you identify the product with the best environmental performance by comparing similar types of product to each other (T-shirts, trousers, backpacks, etc.). Decathlon is committed to displaying environmental information. For more information: http://sustainability.decathlon.com/
Information / Concept / Technology
Composition
Main fabric : 100.0% Polyamide (PA) Outer fabric : 100.0% Polyester (PES) Pocket : 100.0% Polyamide (PA) Inner fabric : 100.0% Polyester (PES)

Test
18 male and female customer testers wore this jacket for a period of 5 days in the Mont-Blanc mountain range.

Product test
Our design team is based at the foot of Mont Blanc, in Haute-Savoie (France). All year round, we create and develop products that are beautiful, simple and technologically advanced. These are then ruthlessly tested in the field, as we remain convinced that only through rigorous testing under real world conditions, like the ones you will be using them in, can we continue to provide you with better products than ever.

Stockage tips
Always make sure that this waterproof protective garment is completely dry before storing it.
    Show results for