C700 Horse Riding Helmet - Matte Black

8325161

FOUGANZA

Write the first review
Made for protecting beginner or experienced riders riding 1-4 times a week, from impacts to the head in the event of a fall.
This horse riding helmet is comfortable to wear and has an attractive streamlined, elegant look. It combines safety, comfort and ventilation. The inner hat is removable and machine washable.
Sizes guide

Beli
     Di Toko

Lihat semua toko

Advantages
AdjustableHarness adjustable using a buckle on the chin.
User comfortInside made of breathable mesh fabric and foam for better comfort.
Ventilation30 holes and 9 ventilation channels. Forehead air inflow. Ventilated nape.
StabilityThe 4-point harness fits all around the head for better support.
Impact protectionRiding helmet complies with Directive 89/686/EEC.
Warranty2 Years
Technical Information

1
Adjusting the helmet:
For optimal protection, the helmet should be in close contact with the head, but without compressing it. When the harness is properly adjusted the helmet should not slide forward, back, or from side to side.
2
Harness adjustment:
For optimal support, the harness must go under the throat, like a chinstrap, not over the chin.
3
Shock absorption:
This helmet has been designed to completely or partially absorb impacts to the rider's head in the event of a fall or violent impact. When an impact occurs, the helmet and/or the padding can deform or break to absorb the energy of the impact. DAMAGE MAY NOT BE VISIBLE, BUT ANY HELMET THAT HAS SUFFERED AN IMPACT MUST BE REPLACED.
4
Ventilation:
30 ventilation holes, facing forwards in the direction that the air enters and facing backwards in the direction that heat is removed. The polystyrene padding includes aeration vents to circulate air throughout the helmet.
5
Inner hat:
Foam padding in a 2D and 3D breathable mesh fabric liner for greater comfort and ventilation. The internal liner is removable for cleaning and maintenance. It can be easily removed thanks to its rip-tab system. Wash the liner in a washing machine at 30° and allow to air dry.
6
Lightweight:
640 g
7
Standard:
The harmonised standard EN 1384 was repealed in October 2014. Until a new version is issued, in order for them to be sold in Europe, all helmets produced after 4 November 2014 must undergo testing and be CE marked. This mark must be accompanied either by Directive 89/686/EEC, or by the VG1 01.040 2014-12 document.
8
Information on standards:
EN 1384 certified helmets can still be worn in training and competitions. However, some organizations may require other standards for their competitions. If in doubt, we recommend that you consult the competition organiser.
9
Care advice:
Steam brush the outside.
Characteristic
TypeNot adjustable
Information / Concept / Technology
Composition
Main lining : 100.0% Acrylonitrile butadiene styrene (ABS)

Test
UTAC, an independent laboratory appointed by the French authorities to conduct tests to establish compliance of safety equipment in accordance with the directives issued by the European Commission in Brussels. Recognised for its technical expertise, the laboratory is one of the official laboratories of independent European body EuroNCAP. UTAC also conducts tests on behalf of the United Nations. It has approved this helmet for use throughout the EU.

Product test
Tested in an independent laboratory in compliance with current regulations.

Stockage tips
Store away from heat sources such as heating appliances or the parcel shelf of a car in the sun, as this can degrade the protective performance of the polystyrene padding.

Maintenance tips
Steam brush the outside.
    Show results for