Outer fabric : 90.0% Polyester (PES), Outer fabric : 10.0% Polyurethane (PU) Inside room : 100.0% Polyester (PES) Pole : 100.0% Aluminium
The waterproofing of Quechua tents is validated, tent mounted, under 200 litres of water/m²/H (tropical rain) during 4 hours excluding any passage of water through seams, flaps, openings, zips, etc.... The water column test (=mm schmerbers) only measures the waterproofing of the fabric. Wind resistance: tents are set up in a wind tunnel on a rotating platform to expose each side of the tent to the wind. We also carry out numerous field tests in real-life conditions.
Storage: after use or cleaning, wait until the tent is perfectly dry before putting it away in order to avoid bad smells and mould.
1 CLEANING - if necessary, use soapy water and rinse (water jet cleaning possible). Perfect drying necessary for storage. 2 RESIN STAIN -...very difficult to remove: once dry, scrape it off (delicately) by putting an ice cube on the inside to make it brittle and detach it more easily. 3 STORAGE - after use or cleaning, wait until the tent is perfectly dry before putting it away in order to avoid bad smells and mould.