Limited field of vision, <100°, but good level of brightness.
Excellent stability thanks to the compact design
Interchangeable nose bridge (3 sizes), split head strap with side adjustment.
Anti-fog treatment on the inner surface of the lenses.
Very flexible seals with a great adaptability to fit the face.
The appearance of fog depends on several factors, the difference in temperature between the body and the water, humidity levels, etc.
Wear due to friction is one of the main causes.
If your goggles fog up, dip your lenses in the water and a protective film will reform.
After a certain amount of time it is normal for the performance of the anti-fog coating to be diminished.
We offer an anti-fog marker that reactivates an ageing anti-fog treatment and makes your goggles last longer.
CHOICE OF SIZE
The watertightness of the swimming goggles is dependent on the proper fit of the skirts with the shape of your face.
Before purchase, we advise you to do the "suction" test without the strap.
If the goggles stay on the face by themselves via slight suction, the product will be watertight during your swim. This also enables you to spot any areas of discomfort or annoyance when the model is on the face.
One-size model with 3 interchangeable nose bridges
HOW TO ADJUST YOUR GOGGLES
These swimming goggles mould to the morphology of your face without needing to be excessively tight.
Goggles that are too tight can cause discomfort, leave marks and even create water inlet holes.
It is not necessary to press against the lenses with your hands, a light suction effect is usually enough for swimming sessions without water inlet holes.
The straps ideally should rest 2 to 3cm above your ears.
This position will optimise the grip and comfort of the goggles.
CARE - PRECAUTIONS
- rinsing your goggles (only if necessary) by simply dipping them in water
- avoiding directing powerful jets of water at the inner surface of the lenses.
- storing the goggles in their case after each session to prevent damage to the lenses (on the inner surface as there is an anti-fog coating and on the outer surface to prevent scratches)
- not exposing them to temperatures of over 60°C
DO NOT TOUCH/RUB THE INSIDE OF YOUR LENSES
The colour of your goggles should be suited to your swimming location and its lighting.
If you swim outside or in a swimming pool with bright lighting, prioritise smoke lenses for greater comfort and to limit the glare.
If, however, the pool is quite dark with low lighting, winter evenings for example, use clear lenses.
The BFIT swimming goggles are available in different lens tints.
Complies with standard: Q/BT 4734 - 2014, all the Nabaiji swimming goggles protect against harmful UVA and UVB rays when used normally, regardless of the lens tint.
Looking directly at the sun is dangerous and can lead to irreversible eye damage.