C700 Horse Riding Helmet - Matte Black



Write the first review
Made for intermediate riders! This helmet protects the rider's head from impact in the event of a fall. Ride safely!
This horse riding helmet is comfortable to wear and has an attractive elegant and unpretentious look. It combines safety, comfort and ventilation. The inner hat is removable and machine washable.
Sizes guide


view all stores

Impact protectionHelmet certified according to the UTAC/CRITT protocol and 89/686/CEE directive
AdjustableHarness is adjustable using a buckle under the chin.
Ventilation30 holes and 9 ventilation channels. Forehead air inflow. Ventilated neck piece.
User comfortInner made of breathable mesh fabric and foam for better comfort.
StabilityThe 4-point harness envelopes the head for superior support.
Warranty2 Years
Technical Information

The UTAC/CRITT protocol on the basis of 04/2015 expert opinion and in accordance with directive 89/686/EEC The harmonised European standard EN1384: 2012 withdrawn in October 2014. Until a new version is issued, in order for them to be sold in Europe, all helmets produced after 4 November 2014 must undergo testing and be CE marked. This marking must be followed either by Directive 89/686/EEC, either by document VG1 01.040 2014-12, either by standard prEN1384:2016, either by EN1384:2017.
Adjusting the helmet:
For optimal protection, the helmet should be in close contact with the head without squeezing it. When properly adjusted, the helmet should not slide forward, backward, or from side to side, even when you are in motion while riding.
Harness adjustment
For optimal support, the helmet's harness/chinstrap should go under the throat, not over the chin.
Shock absorption
This helmet has been designed to completely or partially absorb impacts to the rider's head in the event of a fall or violent impact. When an impact occurs, the helmet and/or the padding can deform or break to absorb the energy of the impact. DAMAGE MAY NOT BE VISIBLE, BUT ANY HELMET THAT HAS SUFFERED AN IMPACT MUST BE REPLACED.
30 ventilation holes, facing forwards in the direction that the air enters and facing backwards in the direction that heat is removed. The polystyrene padding includes aeration vents to circulate air throughout the helmet.
Inner hat:
Foam padding in a 2D and 3D breathable mesh fabric liner for greater comfort and ventilation. The inner liner is removable for cleaning and care. Rip-tab fasteners make it easy to remove. Machine wash the liner at 30° and allow to air dry.
Light weight:
Care advice:
Steam brush the outside.
TypeNot adjustable
Information / Concept / Technology
Main lining : 100.0% Acrylonitrile butadiene styrene (ABS)

UTAC, an independent laboratory appointed by the French authorities to conduct tests to establish compliance of safety equipment in accordance with the directives issued by the European Commission in Brussels. Recognised for its technical expertise, the laboratory is one of the official laboratories of independent European body EuroNCAP. UTAC also conducts tests on behalf of the United Nations. It has certified this helmet for use throughout the EU.

Product test
Tested in an independent laboratory in compliance with current regulations.

Stockage tips
Store away from heat sources such as heating appliances or the parcel shelf of a car in the sun, as this can degrade the protective performance of the polystyrene padding.

Maintenance tips
Steam brush the outside.
    Show results for