Main fabric : 50.0% Polyester (PES), Main fabric : 50.0% Polyurethane (PU) Inside room : 100.0% Polyester (PES) Pole : 100.0% Aluminium Floor mat : 100.0% Polyamide
QUECHUA tent waterproofing is approved for the whole tent under 200 litres of water/hour/sqm (200 mm of rain per hour) for 4 hours. The water column test (=mm schmerbers) only measures fabric waterproofing. Our test means we can prevent any water getting through the seams, flaps, openings, zips, etc. Wind resistance: We test all of our tents in a wind tunnel and on a rotating plate to expose each side of the tent to the wind. Tested in real conditions.
STORAGE - after use or cleaning, do not store your tent until it is PERFECTLY DRY to prevent odours and mould from forming.
1. CLEANING - if needed, clean the tent with soapy water, then rinse (with a hose if possible). Then leave to dry completely. 2. TREE SAP STAINS - Can be very hard to remove Once the stain is fully dry, gently scratch it off while holding an ice cube on the inside of the fabric to make the sap brittle so it will come off more easily. 3. STORAGE - after use or cleaning, do not store your tent until it is perfectly dry to prevent odours and mould from forming.