Hydrophilic coating (RET=12: reduces condensation in the clothing
Ultra soft fabric in the hood for even more comfort
Ease of use
Cords at the end of each zip to open your jacket and pockets easily
Weight: 628 g in size M
Waterproofing of the garment
The garment passed a shower test under 60 litres of water/sqm/hour for two hours. This test reproduces the average conditions of a rain shower. The fabric of this jacket is water repellent, i.e. water runs off its surface without getting absorbed. This prevents the fabric from soaking up water and keeps it lightweight and breathable. The water repellent property is achieved by treating the fabric's exterior. What's more, all the seams are taped.
How to maintain the waterproof property of your jacket over time
In order to maintain good waterproofing over time, the fabric's water-repellent properties must be restored regularly. We recommend doing this every three washes or after a dozen uses in the rain. The waterproof property is easily reactivated by warming the fabric: either in your tumble dryer or with a hair dryer, for example, over a relatively short period. If you are washing it, it must be thoroughly rinsed.
Waterproof rating expressed in mm or schmerber
We measure a fabric's resistance to water pressure, expressed in terms of the height of a water column in mm (based on the ISO 811 standard). The higher the water pressure, the more waterproof the fabric. A component with a waterproof rating of 2,000 mm can therefore withstand the pressure exerted by a 2,000 mm water column.
The hood can be adjusted in height using a drawstring. It can be adjusted in depth thanks to a velcro tab at the back of the hood. The hood has a shape memory visor for good protection of the face.
To find out whether a fabric is breathable, we measure its thermal evaporative resistance coefficient (RET) based on the ISO 11092 standard. The lower the fabric's resistance, the more water vapour generated by physical activity can escape, and the higher the fabric's breathability.
- RET < 9 = extremely breathable fabric
- 9 < RET < 12 = very breathable fabric
- 12 < RET < 20 = breathable fabric
- RET > 20 = little or no breathability
How to choose your waterproof jacket according to your activity and your sporting effort?
During sports activity, the extent to which we perspire depends on the intensity/duration of the physical effort. If the breathability of the fabric is not adapted to your type of physical activity, the perspiration vapour condenses inside the jacket. You will feel damp inside: this is not rain coming through, but perspiration vapour condensing. You therefore need to choose a rain jacket according to your type of physical activity. This jacket is designed for 2h hiking at a max. speed of 5 km/h.
The jacket lining is made up of two materials: mesh in the back to improve the garment's breathability and nylon at the hips to maximise ease of movement and resistance to wear. We have used an ultra-soft fabric on the hood for added comfort.
Complete pocket system
The jacket has seven pockets in total! Two side pockets for warming your hands. Two large external bellows pockets with a flap and press stud closure. One outer chest pocket and one inside pocket with zip closing to secure your personal belongings. One inner mesh pocket, to keep your gloves for example, and keep them warm against your body!
A score for comparing products' environmental impact
On a scale of A to E, this jacket obtained a score of B.
The environmental impacts of our products are calculated over their entire life cycle. A score is attributed to each product so that you can easily identify the most eco-friendly products within a particular family.
Decathlon is a voluntary supporter of this environmentally-friendly labelling approach.
Our hiking jackets and waterproofs are guaranteed for 2 years.
Our commitment? To provide long-lasting products that you can use for all your country walks and strolls. Because the products we love the most are those that have a story to tell and will have more to tell in the future!