Hide Filters
Filters 0
Sort by :
Filters 0
  • SCD diving surface marker buoy with valve - Orange
  • SCD diving surface marker buoy with valve - Orange
  • SCD diving surface marker buoy with valve - Orange
  • SCD diving surface marker buoy with valve - Orange
  • SCD diving surface marker buoy with valve - Orange
  • SCD diving surface marker buoy with valve - Orange
  • SCD diving surface marker buoy with valve - Orange
  • SCD diving surface marker buoy with valve - Orange
SCD diving surface marker buoy with valve - Orange
SUBEA
8501538

SCD diving surface marker buoy with valve - Orange

6 pcs sold
IDR 499,000
  • SCD diving surface marker buoy with valve - Orange
  • SCD diving surface marker buoy with valve - Orange
  • SCD diving surface marker buoy with valve - Orange
  • SCD diving surface marker buoy with valve - Orange
  • SCD diving surface marker buoy with valve - Orange
  • SCD diving surface marker buoy with valve - Orange
  • SCD diving surface marker buoy with valve - Orange
  • SCD diving surface marker buoy with valve - Orange
SCD diving surface marker buoy with valve - Orange
Not available online

Store Availability

Subea has developed a delayed surface marker buoy with valve that remains inflated. Very simple to use with a spool or a classic ballast.

A surface marker buoy that remains fully inflated! Ideal for your safety at the end of the dive. It enables the boat to easily find you!

Main fabric: 80.0% Polyamide, 20.0% Polyurethane

BENEFITS

Easy spotting

Surface marker buoy remains fully inflated.
2 SOLAS retro-reflective strips.

Ease of use

Inflatable from below, using your mouth, or with the direct system hose

Abrasion resistance

Coated fabric. Stitching protected & reinforced by protective material (braid).

Flexibility

Ring to attach the spool and surface marker buoy to the outside

Content protection

Storage net directly attached to the surface marker buoy for folding it

TECHNICAL INFORMATIONS

Characteristics

Stainless-steel attachment ring on the outside to use the surface marker buoy with a spool (sold separately).
Main fabric made of polyamide with a polyurethane coating that provides good resistance to abrasion and friction. Stitching protected and reinforced by protective material (braid).
It is equipped with two SOLAS reflective strips on the top to facilitate identification by the boat.

Dimensions

Length: 147 cm.
Total length with pouch: 172 cm.
Width: 15 cm.
Thickness (rolled up): 7 cm.
Pressure relief and inflater valve.

Inflating/deflating the surface marker

The surface marker buoy can be inflated in three ways: Typically, from below, with your mouth, or with a direct system hose using the inflater. It is, thus, inflatable on the surface.
Once inflated, the air is completely trapped. This allows it to always remain completely inflated.
It is equipped with a pressure relief valve to let air out in case of overpressure, i.e. if it is too inflated, especially at depth. This valve also allows the surface marker to be deflated.