Starting temperature 95°C: 74°C after 6 hours. Be careful with hot liquids.
Ease of use
Quick opening with one hand, top can be locked with the handle. Ss steel. 366 g.
Easy to clean thanks to its removable top. Stainless steel inner wall.
Double wall ss steel 18/8 (304) design with a vacuum between the two walls.
Advice for maximising the performance of your isothermal flask.
The fuller the flask, the better it is at keeping the contents hot or cold.
Be careful when using hot liquids, the flask is extremely well insulated, liquids will remain hot for a long time!
We use a double stainless wall with a vacuum between to block thermal exchanges by conduction or convection. To block exchanges by thermal radiation, a fine layer of copper covers the outside of the inner wall.
The top is easy to open with one hand by pressing on the white button marked "PRESS". When carrying the flask, you can lock this button by sliding the white button down. A red area appears, indicating that the top is locked and it can no longer be pressed.
The top has an integrated filter to keep large tea leaves or infused fruits out of your cup. Not suitable for very fine cut teas.
Dishwasher safe (top + body) Be careful not to lose the top seals. Dry with the top off. The top's seal can be removed for a complete wash and dry.
Rinse the entire product 3 times with clean water before first use.
Materials and regulations
Our products and materials meet the food contact standards in force. They do not contain Bisphenol A (BPA) in accordance with the French regulations in force.
We have chosen to use 18/8 (304) stainless steel for the flask's body, recognised for its food safety and for the top, a heat and shock resistant polypropylene.
Weight and dimensions
Volume: 0.8 litre
Dimensions: Ø 8.2 cm x 26.5 cm
Weight: 366 grams (Body 320 grams and top 46 grams)
To reduce the environmental impact of this flask, we have done the following:
- Choice of an extremely durable material (stainless steel) that is guaranteed 5 years
- Top can be purchased separately for repairs and the seals are easy to replace
- No use of varnish
- Marked by laser engraving
- Solvent-free paint (powder coating)
- Reduced packaging and shipping packing
- Produced in a factory that uses 100% renewable energy